How is CBD Oil Made? Step-by-Step Process
CBD oil is a convenient way to incorporate CBD into your daily routine. All you have to do is drop a few CBD drops under your tongue and you’re good to go.
But have you ever wondered where CBD comes from and how it’s made? What are the steps needed to create high-quality CBD products? That’s what we’ll be exploring today.
Read on for the step-by-step process for making CBD oil, from harvesting hemp flowers to the final product.
Step 1: Harvesting the Hemp
The whole process begins with hemp plants. At Orange County CBD, we source our CBD products from 100% organic hemp. We only use the best growers in the United States.
Typically, hemp plants are harvested at the peak of their CBD content. This is to maximise potency. We use hemp plants as they contain high levels of CBD, but low levels of THC.
When the CBD flowers have been picked, we move on to the next stage - drying the hemp for extraction.
Step 2: Drying the Hemp
Once the hemp has been harvested, the hemp plants must be dried. The drying process removes any excess moisture. This is essential as it prevents mould growth and preserves the integrity of the plant’s cannabinoids.
Step 3: Extraction Process
Next is the extraction process. There are several extraction methods for acquiring CBD from hemp flowers - the two main techniques being carbon dioxide (CO2) extraction and ethanol extraction.
Carbon Dioxide (CO2) Extraction
This is arguably the most popular method for obtaining high-quality CBD oil. It involves using pressurised carbon dioxide to extract cannabinoids, terpenes, and other beneficial compounds from the hemp plant.
This method allows a higher level of control over temperature and pressure, resulting in a pure and potent CBD extract.
Ethanol Extraction
Ethanol extraction involves soaking the hemp flowers in ethanol to draw out the desired compounds. This method is efficient and cost-effective - however, it may require additional refining steps to remove any residue.
Step 4: Lab Testing
The next step involves testing the CBD. Quality control is hugely important in the CBD industry, and at Orange County CBD, we ensure our products go through rigorous lab testing.
We ensure that no ingredients derived from GMOs make their way into our CBD. All of our products are third-party tested at an ISO17025-certified laboratory for your peace of mind.
Why is Lab Testing Important?
Lab testing is important as it ensures the safety and quality of the CBD. It verifies if the CBD content matches what's on the label, confirming potency for effectiveness. Testing also checks for contaminants and harmful substances like pesticides, heavy metals, and solvents, ensuring products are safe for consumption.
Without testing, you risk ingesting impurities or inaccurate CBD levels, which can affect your health and your overall CBD experience. Ultimately, lab testing is key to guaranteeing transparency, reliability, and trust in CBD products.
Step 5: Creating CBD Oil
When the CBD has passed the lab tests, it’s time to transform it into CBD oil. The CBD extract is then mixed with a carrier oil, such as:
- Hemp seed oil
- Olive oil
- Coconut oil
These oils are essentially a vehicle for CBD. Firstly, carrier oils help with absorption, as CBD on its own is difficult for the body to absorb efficiently.
Secondly, carrier oils like coconut oil or hemp seed oil can provide additional health benefits themselves, such as essential fatty acids.
Thirdly, it makes dosing easier, allowing for accurate measurements. Finally, carrier oils dilute the concentrated CBD extract, making it safer and more manageable for consumption. Overall, using a carrier oil enhances the effectiveness, safety, and convenience of CBD products.
Step 6: The Final Product!
Now we have the final product! Once the product has been mixed, the CBD will go through one final quality check to ensure potency, consistency and quality.
What Do I Do With CBD Oil?
1 - Choose your product - First of all, choose a CBD oil that suits your needs and preferences. Consider factors like potency, flavour, and type (full-spectrum, broad-spectrum, or isolate).
2 - Shake well - Before you use the product, shake the bottle well to ensure the CBD is evenly distributed in the carrier oil.
3 - Measure your dose - Use the dropper provided with the CBD oil to measure your desired dose. It’s generally best to start with a low dose and gradually increase until you achieve the desired effects.
4 - Administer sublingually - Place the measured dose of CBD oil under your tongue using the dropper. Hold it there for 60-90 seconds before swallowing. This allows for faster absorption into the bloodstream through the sublingual glands.
5 - Orally ingest - If you don’t feel like leaving it under your tongue, you can swallow the CBD oil directly or mix it with food or beverages. However, keep in mind that ingesting CBD orally may result in slower onset but longer-lasting effects compared to taking it sublingually.
6 - Repeat as needed - Depending on your reasons for taking CBD, you may wish to take it several times throughout the day. Be sure to follow the dosage instructions!
7 - Store properly - Store your CBD oil in a cool, dark place. Keep it away from direct sunlight and heat to ensure it stays potent and fresh.
CBD Oil at Orange County CBD
If you’re looking for high-quality CBD oil, look no further than Orange County CBD. We offer a range of high-quality CBD products, including convenient CBD vapes, tasty CBD gummies, and of course, CBD oil.
If you’re a beginner, consider our 500mg CBD oil - it’s a perfect introduction to the world of CBD. However, if you’re a regular CBD user, why not opt for our super-high-strength CBD oil? We have strengths of up to 25,000mg.
Choose between flavours such as mint, apple and cherry. Begin incorporating CBD into your wellness routine today with Orange County CBD!